This huge pegboard accent wall is fashionable and pretty realistic. For Rachel Metz, of Residing to Do-it-yourself, it’s an eye-catching accent wall to her business place. We could effortlessly see it functioning in a kid’s bedroom, or informal reward room.
Rachel displays us the measures to follow so you can make your individual pegboard accent wall in your house.
Jumbo Pegboard Accent Wall
Pinterest inside style inspiration has constantly been a weak spot of mine. I goo and gah above the pictures that I look for at just one in the early morning when I must be sleeping. When I made a decision to choose on the job of reworking my business place, I made a decision make all my wildest Pinterest dreams appear true. 1st on the listing – not just a Do-it-yourself huge pegboard but an total Do-it-yourself jumbo pegboard accent wall – certainly, the total wall!
- a hundred and twenty grit sandpaper
- Wooden dowels
- Wooden screws
- Wooden putty
- Slimmer wooden items – width is dependent on the glimpse you want!
- Adequate 2 x 4’s to appropriate aid your plywood
I commenced off by obtaining my plywood lower down to size at my regional Dwelling Depot retail outlet. This saves me a ton of time and it will for you much too if you aren’t familiar with massive cuts. I bought two items and lower them down to forty six in. x 92 in. since I required to place them with each other (flush) to include my total wall.
Per all Do-it-yourself initiatives, these measurements will range with your place.
Choose your ruler and figure out the spacing that functions greatest for you! Everyone’s style will be distinctive whether or not you want the holes to be closer with each other or not. I took my pencil and went along the base/sides marking a line at each and every 5¾ in.
When you have built your marks along the sides choose your ruler and pencil to draw straight traces at people markings which will generate a grid.
Where the traces intersect is exactly where you will be drilling your gap to put your dowels or “pegs.”
For me, the spacing was a tiny much too shut, so I made a decision to go again in with my pencil to generate a “X” at each and every other level. This will place it out which gives me that minimalist vibe I am wanting for.
You want to slide some wooden beneath the plywood you are about to drill to shield the drill bit and flooring. When you prop it up, only drill a gap accurately exactly where your X’s are marked, or if you are alright with how shut the grid is normally, make a gap at each and every intersection.
Tip: You can obtain a drill guidebook or Do-it-yourself just one, which I clearly show you in my whole YouTube tutorial for this huge pegboard wall venture. This will guarantee your holes are straight so your dowels won’t go in crooked!
Tip: Drill a tiny bit to break by the surface area so the wooden doesn’t splinter so much then drill all the way by. This helps make the holes glimpse super thoroughly clean opposed to splintering and sanding it down.
Sand off your pencil markings at the time you have drilled all your holes.
In order to set up the pegboard accent wall appropriately, I required to come across the studs in the wall.
I marked the studs with a X and screwed my 2 x 4’s horizontally into the wall, which the pegboard will be instantly screwed into. To come across out exactly where I required to hang the 2 x 4’s, I calculated from the best of my plywood piece and built notice of exactly where there weren’t holes. I then calculated and marked the similar spacing on the wall when I place up the 2 x 4’s.
Tip: Make absolutely sure you have your amount useful to guarantee all your 2 x 4’s are straight.
You should make absolutely sure you have a human useful to help you set up your plywood.
Area the board up and align it so the beams are hiding into concerning the holes! Then drill your wooden screws into the plywood then into your beams.
I used wooden putty to include up the screws and then sanded it down at the time it dried – it appeared flawless!
Slide your dowels into the pegboard accent wall and measure exactly where you’d like to lower. Grab some wooden (width of your preference) and guarantee your dowels are extensive more than enough to maintain them up. When I figured out how extensive I required these, I lower them on my table saw.
Dangle them up! Have exciting with it, get insane and go stuff around on the pegboard accent wall until eventually you are pleased with the placement.
Creating an accent wall has constantly been on my listing of Do-it-yourself house decor and this was the best addition.