Shara McCuiston of Woodshop Diaries created a gorgeous herringbone barn wood accent wall in her household. Study a lot more to discover out how to get this appear for your household.
How to Install a Barn Wood Accent Wall in Herringbone Pattern
Barn wood is so fashionable appropriate now. 1 great way to use it in your household is for an eye catching accent wall. Though a barn wood accent wall looks great in any sample, herringbone is 1 of my preferred patterns and it’s considerably much easier to set up than it would seem. This step-by-step guide will exhibit you how to use these brilliant Weaber Weathered Wall Boards to set up a herringbone sample barn wood accent wall.
- Weaber Weathered Wall Boards (ample to include the wall—see Step one)
- one ½-in. or for a longer time brad nails
- Liquid Nails (optional)
- Dim paint (ample to include the wall)
- Outlet Extenders (optional)
Step one: Figure out How Substantially Barn Wood is Desired
To start with you will need to identify how a lot of containers of Wall Boards you will will need to include your wall. Uncover the square footage of the wall you are masking. Just about every box of barn wood boards will include 10.5 square toes.
Divide your wall square footage by 10.5 and spherical up. For a herringbone sample, incorporate at least fifteen-twenty% for squander from cuts.
Step 2: Paint the Accent Wall
Before you start off attaching your boards, be certain to paint your accent wall a dim shade. Never skip this step! Due to the rustic and weathered mother nature of the boards, it is doable to have some smaller gaps involving boards for the duration of installation. Portray the wall a dim shade will help mask these gaps.
Step 3: Mark the Middle and Studs
Measure and mark the heart of the wall. Making use of a extensive stage, attract a vertical heart line from flooring to ceiling.
Do the very same for the studs. Use a stud finder to mark all the studs in the wall and use a extensive stage to attract these vertical lines all the way up.
Step four: Attach the To start with Two Boards
Now to the pleasurable part…attaching the boards! Seize two boards from the box and mark the centers of the board ends. Line the boards up on the wall alongside the heart line like revealed in this diagram. Make certain to use a velocity square to make certain 90 levels involving the boards.
Slice 45 levels off the ends exactly where it will meet the baseboard. It’s least complicated to slice these so the boards are as extensive as doable. Mark and slice out with a jig saw all over any shops the boards may perhaps run into. Remove the plates (be thorough to transform off electricity just before accomplishing everything with the shops and handles!) and slice so that the cuts will be covered with the plates when they are placed back on.
Once you have your boards in put and all cuts manufactured, use a nail gun to attach the boards to the wall at the stud marks. Make certain you nail into the studs.
Observe: For a lot more protected boards, use liquid nails AND brad nails. We selected to skip the liquid nails to make removal much easier afterwards if we at any time made a decision to clear away them.
Step 5: Carry on incorporating boards across the wall
Include boards to the wall working your way outward. Make certain to nail the boards into the studs you marked earlier.
Through installation, we uncovered that some boards may perhaps be a little for a longer time or shorter than others, so it was finest to lay a several at a time on the wall to make certain they fit with each other effectively just before nailing. Take note of the herringbone sample and double check occasionally to make certain you are being square when two boards butt with each other.
All cuts (in addition to cutting all over shops and other hurdles) must be 45 levels. So when you get to a baseboard, slice a 45 diploma angle. When you get to an edge, slice a different 45 diploma angle.
Slicing all boards to fit helps avert any substantial gaps on the edges. Just maintain the board in put and mark exactly where to slice. When in question, slice way too extensive and you can constantly trim down.
Mark and slice all over hurdles like Tv set mounts and shops making use of a jig saw.
Perform your way across the wall just before transferring up. Once you finally get to just ending out your corners, you can start off making use of up some of your scrap pieces so you don’t run out of boards.
Step six: Exchange Outlet Covers
If you experienced to clear away any outlet handles to slice all over, change them now. If the screws will not achieve, you can set up outlet extenders (from time to time utilized in tile purposes) on these shops.
In this case, we also experienced a wall mounted Tv set to change.
And now, step back and admire your gorgeous new weathered wood herringbone accent wall!
Follow our Living Area Concepts board on Pinterest for a lot more inspiring decor tips. Uncover a lot more inspiration to decorate your living room for your design and style in our Living Area Concepts on The Household Depot Blog.
To generate your individual weathered wood accent wall, store barn wood and other look boards at The Household Depot.
The write-up How to Install a Barn Wood Accent Wall in Herringbone Pattern appeared 1st on The Household Depot Blog.