How To Paint Your Fireplace
- BEHR Paint (proven: Pink Mimosa)
- BEHR Primer/Sealer
- Painter’s Tape
- Drop Cloths
- Heat-Resistant Paint (if required)
Move 1: Get ready for Paint
Move two: Scrub the Brick
Give the brick a fantastic scrub employing a stiff wire brush to knock off any free grout or dust. Vacuum extensively. If there are any grout or mortar repairs to be built, make them now.
Move three: Remove Soot
Working with a degreaser, clean up the brick extensively. Wipe it down with rags and/or rinse in accordance to the manufacturer’s guidance. A citrus-based mostly degreaser can take away light grime, but if you’re working with decades of soot, you may possibly will need a major-duty item like TSP. Usually wear gloves, eye security and a mask.
Move four: Primary the Brick
With the floor clean up and dry, seal it with a higher-good quality primer. Use a paint roller to use two coats here as brick can be extremely porous. Be sure to use a roller include that’s designed for textured surfaces.
Move five: Paint the Brick
At the time the primer is fully dry, finish up with a fresh new coat of water-based mostly semi-gloss latex paint. Use a textured roller and brush to get into all the nooks and crannies.
Observe: If you’re portray the firebox Inside, you are going to will need a warmth-resistant specialty paint, also readily available at The Property Depot.