Move one: Flip the Get rid of Change
First, you will want to flip the get rid of change for the fixture at the breaker box to assure the wires are protected to contact.
Move two: Get rid of Previous Light
With the energy off, remove the previous light-weight fixture by backing out the screws on the canopy cover. Carefully pull cover away to expose related wiring. Untwist the plastic wire nuts to release the wires. If doing work with a large or major fixture this is a two-particular person task.
Take note: Ensure the energy is off with a circuit tester, it only charges a pair of bucks. Just contact it to the white and black wires to verify that the energy is in truth off. If so, disconnect the grounding wire from the grounding nut, then unscrew and remove the previous mounting bar and remove the previous fixture.
Move 3: Prep the New Light
Unbox the new fixture, unwrap all the things and manage its pieces and parts. The moment you’ve established that the electrical box can securely guidance the bodyweight of the new fixture,* screw the threaded mounting stem into the new mounting bar, then regulate the chain and wiring to the wished-for height, making use of pliers as wanted.
*Take note: Any fixture weighing extra than 50 lbs. will call for extra guidance. This usually means the electrical box need to be firmly secured to a ceiling joist or wood bracing, or you will will need to install an adjustable guidance bracket (typically applied with ceiling supporters).
Move four: Connect the Wires
To hook up the wiring, operate it as a result of the mounting stem and canopy. Use wire strippers to expose ¾-in. of wire. Then, hook up white to white and black to black with the wire nuts provided. Up coming, hook up the copper ground wire to the grounding nut.
Move five: Insert Bulbs
Tuck the related wires up into the electrical box and protected the new canopy plate in position. Insert bulbs, turn on electricity… and enjoy
Take note: Often reference your specific fixture’s set up recommendations.